Sameh Aymanسامح أيمن

Senior Geomatics & GIS Specialistأخصائي أول جيوماتكس ونظم معلومات جغرافية

From raw point clouds to decisions people can act on.من سحابة النقاط الخام إلى قرارات يمكن البناء عليها.

10+ years in land surveying, Mobile Mapping, LiDAR and GIS across Saudi Arabia and Egypt.أكثر من 10 سنوات في المساحة والمسح المتنقل والليدار ونظم المعلومات الجغرافية في السعودية ومصر.

E 674 210 · N 2 734 880 UTM 38N Z
DisciplineالتخصصGeomatics · GISالجيوماتكس · GIS
Experienceالخبرة10+ years+10 سنوات
Based inالمقرSaudi Arabiaالسعودية
DatumالمرجعWGS 84 · KSA-GRF17
StatusالحالةOpen to consultingمتاح للاستشارات
Aboutنبذة

Surveyor by training, systems thinker by practice.مساح بالتكوين، ومفكر في الأنظمة بالممارسة.

I am a Senior Geomatics & GIS Specialist working on digital twins and mobile mapping, and a member of the Saudi Council of Engineers (classified GIS Specialist). Since 2016 I have worked across land surveying, GIS, Mobile Mapping Systems, LiDAR and BIM-GIS integration on infrastructure and smart-city projects in Saudi Arabia and Egypt.

أخصائي أول في الجيوماتكس ونظم المعلومات الجغرافية، أعمل على التوائم الرقمية والمسح المتنقل، وعضو الهيئة السعودية للمهندسين بتصنيف أخصائي نظم معلومات جغرافية. منذ 2016 أعمل في المساحة ونظم المعلومات الجغرافية وأنظمة المسح المتنقل والليدار وتكامل BIM مع GIS، في مشاريع بنية تحتية ومدن ذكية بالسعودية ومصر.

My current focus is bringing GIS, BIM, CAD, point cloud and GPR data into one coordinated 3D environment, so engineers can see above-ground and underground assets together, check for conflicts and decide with confidence. This work was presented at the FIG Working Week in South Africa.

أركز حالياً على دمج بيانات GIS وBIM وCAD وسحب النقاط والرادار الأرضي (GPR) في بيئة ثلاثية الأبعاد واحدة، ليرى المهندسون الأصول فوق الأرض وتحتها معاً، ويكشفوا التعارضات ويتخذوا القرار بثقة. وقد عُرض هذا العمل في أسبوع عمل FIG بجنوب أفريقيا.

I automate repetitive geospatial work with Python, I have taught GIS at university level, and as a PMI member preparing for the PMP I bring the same discipline to scope, schedule and quality.

أؤتمت المهام المكانية المتكررة باستخدام Python، ودرّست نظم المعلومات الجغرافية أكاديمياً، وبصفتي عضواً في PMI ومرشحاً لشهادة PMP أطبق الانضباط نفسه على النطاق والجدول والجودة.

Current roleالدور الحالي
MMS Expert, Alqotrخبير مسح متنقل، القطر
In the field sinceفي المجال منذ
2016
Presented atعُرض عملي في
FIG Working Week
Membershipالعضويات
Saudi Council of Engineers · PMIالهيئة السعودية للمهندسين · PMI
Languagesاللغات
Arabic (native) · Englishالعربية (الأم) · الإنجليزية
Expertiseالخبرات

What I deliverما أقدّمه

Six service lines, each tied to deliverables a client can check.ستة مجالات خدمة، لكل منها مخرجات واضحة يمكن للعميل مراجعتها.

TWIN

3D GIS & Digital TwinsGIS ثلاثي الأبعاد والتوائم الرقمية

One coordinated 3D city model combining BIM, CAD, point clouds and underground GPR data, for visualisation and clash analysis.نموذج مدينة ثلاثي الأبعاد يجمع BIM وCAD وسحب النقاط وبيانات GPR تحت الأرض، للعرض وتحليل التعارضات.

MMS

Mobile Mapping & LiDARالمسح المتنقل والليدار

LiDAR and panoramic capture with Trimble MX, then feature extraction and QC in TBC, TopoDOT, Orbit and MicroStation.رفع بالليدار والصور البانورامية بنظام Trimble MX، ثم استخراج العناصر وضبط الجودة في TBC وTopoDOT وOrbit وMicroStation.

DTM

Surveying & Terrainالمساحة ونماذج السطح

GNSS and total station surveys, DTM/DEM, contours, staking, and volume calculations in Civil 3D.رفع بأجهزة GNSS والمحطة الشاملة، ونماذج DTM/DEM وخطوط الكنتور والتوقيع، وحساب الكميات في Civil 3D.

GDB

GIS & Utility NetworksGIS وشبكات المرافق

Geodatabases, utility network modelling and spatial analysis in ArcGIS Pro, with PostgreSQL and SQL Server back ends.قواعد بيانات مكانية ونمذجة شبكات المرافق والتحليل المكاني في ArcGIS Pro، مع قواعد PostgreSQL وSQL Server.

CAD ↔ GIS

Engineering Drawings & Cadastreالرسومات الهندسية والمساحة العقارية

AutoCAD drawings linked to GIS databases, including property and cadastral boundary mapping.لوحات AutoCAD مرتبطة بقواعد بيانات GIS، ومنها تحديد حدود الملكيات والأراضي.

RS · UAV

Remote Sensing & Photogrammetryالاستشعار عن بعد والتصوير الجوي

Satellite and aerial image analysis: classification, change detection, clipping and mosaicking in ERDAS Imagine and ArcGIS, plus drone photogrammetry in Metashape.تحليل المرئيات الفضائية والصور الجوية: التصنيف، رصد التغير، القص والدمج في ERDAS Imagine وArcGIS، إضافة إلى التصوير الجوي بالدرون في Metashape.

Selected workنماذج الأعمال

More case studiesدراسات حالة أخرى

Images are extracts from project deliverables. Client details are limited where projects are confidential.الصور مقتطفات من مخرجات المشاريع الفعلية، مع الاكتفاء بالتفاصيل المسموح بنشرها في المشاريع السرية.

Workflow · 36 s · capture → cloud → extraction → CADمسار العمل · 36 ثانية · الرفع ← السحابة ← الاستخراج ← CAD
MMSAlqotr · AJC · 2022 – 2026

Mobile mapping, LiDAR & feature extractionالمسح المتنقل والليدار واستخراج العناصر

Vehicle-mounted LiDAR and 360° imagery captured street by street, then registered, colorized and classified into survey-grade point clouds. From the cloud I extract kerbs, lane markings, poles, signs, fences and building lines into CAD and GIS layers, build ground models, and run AI detection of visual pollution and road defects. One delivered corridor survey covers about 10 km of highway with interchanges, bridge columns and 4,499 surveyed points.رفع بالليدار والصور البانورامية المحمولة على المركبات شارعاً بشارع، ثم تسجيل البيانات وتلوينها وتصنيفها إلى سحب نقاط بدقة مساحية. أستخرج من السحابة الأرصفة وخطوط المسارات والأعمدة واللوحات والأسوار وخطوط المباني إلى طبقات CAD وGIS، وأبني نماذج السطح، وأشغّل الكشف الآلي عن التشوه البصري وعيوب الطرق. أحد الممرات المسلّمة يغطي نحو 10 كم من طريق سريع بتقاطعاته وأعمدة جسوره و4,499 نقطة مرفوعة.

Roleدوري
Capture, processing, extraction, QC and final deliverablesالرفع والمعالجة والاستخراج وضبط الجودة والمخرجات النهائية
Outputالمخرجات
Classified point clouds, CAD/GIS feature layers, DTM, defect reportsسحب نقاط مصنفة، طبقات عناصر CAD/GIS، نماذج سطح، تقارير العيوب
Toolsالأدوات
Trimble MXTBCTopoDOTOrbit 3DAutoCADArcGIS ProAI detection
Workflow · 26 s · registration → bridges → DEMمسار العمل · 26 ثانية · التسجيل ← الجسور ← نموذج الارتفاعات
MMSAlqotr · 2025

Highway corridor point cloud & DEMسحابة نقاط ممر طريق سريع ونموذج الارتفاعات

Mobile mapping of an urban highway with bridges, interchanges and ramps, processed in Trimble Business Center into a classified point cloud and a ground DEM, then a surface drawing for design.رفع متنقل لطريق سريع حضري بجسوره وتقاطعاته ومنحدراته، ومعالجته في Trimble Business Center إلى سحابة نقاط مصنفة ونموذج ارتفاعات رقمي للأرض، ثم لوحة سطح للتصميم.

Roleدوري
Project lead: processing, classification, DEM and surfaceقائد المشروع: المعالجة والتصنيف ونموذج الارتفاعات والسطح
Outputالمخرجات
Classified point cloud, DEM raster, Civil 3D surfaceسحابة نقاط مصنفة، نموذج ارتفاعات، سطح Civil 3D
Toolsالأدوات
Trimble MXTBCArcGIS ProCivil 3D
Workflow · 32 s · scan → cloud → BIM → plansمسار العمل · 32 ثانية · المسح ← السحابة ← BIM ← المخططات
SCANAlqotr · 2025 – 2026

Reality capture, scan-to-BIM & virtual toursالرفع ثلاثي الأبعاد والنمذجة وجولات الواقع الافتراضي

Terrestrial and SLAM laser scanning of buildings and heritage sites, turned into architectural and MEP models, 2D floor plans and Matterport virtual tours for owners and facility managers.مسح ليزري أرضي ومحمول (SLAM) للمباني والمواقع التراثية، وتحويله إلى نماذج معمارية وكهروميكانيكية ومخططات ثنائية الأبعاد وجولات افتراضية (Matterport) للملاك ومديري المنشآت.

Roleدوري
Scan planning, registration, scan-to-BIM workflow and deliverablesتخطيط المسح والتسجيل وسير عمل النمذجة والمخرجات
Outputالمخرجات
Point clouds, BIM models, floor plans, virtual toursسحب نقاط، نماذج BIM، مخططات، جولات افتراضية
Toolsالأدوات
FARO FocusTrimble X12SLAMMatterportRevitAutoCAD
GeoAI · 7 detection tasksالذكاء الاصطناعي الجيومكاني · 7 مهام كشف
GEOAIAJC · Alqotr · 2023 – 2026

AI-assisted classification & feature extractionالتصنيف والاستخراج الآلي بالذكاء الاصطناعي

Point cloud and imagery software now ships with AI tools, and I use them to replace slow manual digitising: classifying ground, buildings, vegetation and street furniture in LiDAR clouds, then running deep-learning detection on drone orthophotos and MMS panoramas. On team GeoAI projects that meant segmenting roads and buildings, flagging neglected plots and facade defects for visual-pollution studies, finding dilapidated buildings, and counting palm trees and grading their health without a field visit. Every automated result is checked and cleaned before it reaches the GIS.برامج معالجة السحب النقطية والصور أصبحت تضم أدوات ذكاء اصطناعي، وأستخدمها بدل الترقيم اليدوي البطيء: تصنيف الأرض والمباني والنباتات وعناصر الشارع في سحب الليدار، ثم تشغيل نماذج التعلم العميق على الصور الجوية من الدرون وصور المسح المتنقل البانورامية. وفي مشاريع الفريق للذكاء الاصطناعي الجيومكاني شمل ذلك فصل الطرق والمباني، ورصد الفراغات المهملة وتشوهات الواجهات لدراسات التشوه البصري، وكشف المباني المتهالكة، وحصر النخيل وتقييم صحته دون زيارة ميدانية. وكل نتيجة آلية تُراجع وتُنقّح قبل دخولها قاعدة بيانات GIS.

Roleدوري
Running AI classification and detection tools, reviewing results, loading them into GIS (team projects)تشغيل أدوات التصنيف والكشف الآلي ومراجعة النتائج وإدخالها في GIS (مشاريع فريق)
Outputالمخرجات
Classified point clouds, detected features, inventory and condition layersسحب نقاط مصنفة، عناصر مستخرجة، طبقات حصر وتقييم حالة
Toolsالأدوات
AI point cloud classificationDeep learningMask R-CNNU-NetArcGIS ProMMS panoramasDrone imagery
Workflow · 29 s · data model → zones → 3D featuresمسار العمل · 29 ثانية · نموذج البيانات ← المناطق ← العناصر ثلاثية الأبعاد
3D GISAlqotr · 2025

3D topographic GIS for a major Riyadh developmentقاعدة بيانات طبوغرافية ثلاثية الأبعاد لمشروع تطوير كبير في الرياض

I led the conversion of survey and CAD data into a single 3D geodatabase across three zones and a boulevard: 193,963 features in 39 layers, each with X, Y and Z. The model covers spot levels, buildings, walls, road edges, kerbs, trees, light poles, manholes, water assets and green areas, ready for design and asset teams.قدت تحويل بيانات الرفع وملفات CAD إلى قاعدة بيانات جغرافية ثلاثية الأبعاد واحدة لثلاث مناطق وممر رئيسي: 193,963 عنصراً في 39 طبقة، لكل عنصر إحداثياته الثلاثية. يغطي النموذج المناسيب والمباني والأسوار وحواف الطرق والأرصفة والأشجار وأعمدة الإنارة وغرف التفتيش وأصول المياه والمسطحات الخضراء، جاهزاً لفرق التصميم وإدارة الأصول.

Roleدوري
Project lead: data model, CAD-to-GIS conversion, 3D attribution, QCقائد المشروع: نموذج البيانات، تحويل CAD إلى GIS، الإسناد ثلاثي الأبعاد، الجودة
Outputالمخرجات
Zone geodatabases, 3D feature classes, CAD deliverablesقواعد بيانات المناطق، فئات ثلاثية الأبعاد، مخرجات CAD
Toolsالأدوات
ArcGIS ProAutoCADCivil 3DData migration
Case-study film · 1 min 45 s · with soundفيلم المشروع · دقيقة و45 ثانية · بالصوت
GDBAJC · 2022 – 2025

Electricity distribution GISنظم المعلومات الجغرافية لشبكات توزيع الكهرباء

Digital transformation of a national utility's distribution network, which I worked on for a long period. Field teams photographed every asset; I turned the photos and survey data into features in an ArcFM utility data model (58 feature classes), built substations from CAD design templates, and rebuilt the low-voltage network from the feeder numbers: 1,038 feeders traced from substation through each distribution box in order. Every zone then went through rule checks (boxes with no matching substation, boxes more than 500 m from their substation, used circuits above installed circuits, non-standard transformer ratings) and attribute-completeness scoring before handover. The analysis layer shows installed transformer capacity (307 MVA of known ratings in one zone), LV circuit utilisation (65% in multi-circuit boxes, with 268 boxes fully used) and 166 substation service areas. On satellite imagery of the zone I also ran outage scenarios: when a substation goes out of service, its 17 boxes are traced and back-fed from the 4 nearest live substations (median transfer 73 m). IDs and customer data are left out.التحول الرقمي لشبكة توزيع مرفق وطني، وهو مشروع عملت عليه فترة طويلة. صوّرت الفرق الميدانية كل أصل، وحوّلتُ الصور والبيانات المساحية إلى عناصر في نموذج بيانات المرفق ArcFM (58 فئة)، وبنيت المحطات من قوالب التصميم في AutoCAD، وأعدت بناء شبكة الجهد المنخفض من أرقام المغذيات: تتبعت 1,038 مغذياً من المحطة عبر كل صندوق توزيع بالترتيب. ثم خضعت كل منطقة لفحوص القواعد (صناديق بلا رقم محطة مطابق، وصناديق تبعد أكثر من 500 م عن محطتها، ودوائر مستخدمة أكثر من المركبة، وقدرات محولات غير قياسية) ولقياس اكتمال البيانات قبل التسليم. وتعرض طبقة التحليل القدرة المركبة للمحولات (307 ميجافولت أمبير من القدرات المعروفة في منطقة واحدة)، واستغلال دوائر الجهد المنخفض (65% في الصناديق متعددة الدوائر، و268 صندوقاً مستغلاً بالكامل)، و166 منطقة خدمة للمحطات. وعلى المرئيات الفضائية للمنطقة نفذت سيناريوهات الانقطاع: عند خروج محطة من الخدمة تُتتبع صناديقها السبعة عشر وتُغذّى عكسياً من أقرب 4 محطات عاملة (بمسافة نقل وسيطة 73 م). حُذفت الأرقام وبيانات المشتركين.

Roleدوري
Data intake, network modelling, substation building, rule-based QC, analysis, team guidanceاستلام البيانات، نمذجة الشبكة، بناء المحطات، ضبط الجودة بالقواعد، التحليل، توجيه الفريق
Outputالمخرجات
Validated network geodatabase, QC reports, capacity and utilisation maps, service-area layerقاعدة بيانات شبكة معتمدة، تقارير الجودة، خرائط القدرات والاستغلال، طبقة مناطق الخدمة
Toolsالأدوات
ArcGISArcFMAutoCADExcel
Sheet set → detail → surface QC · 36 sاللوحات ← التفاصيل ← فحص السطح · 36 ثانية
TOPOAlqotr · 2025

Topographic survey of five sites in Makkahالرفع الطبوغرافي لخمسة مواقع في مكة المكرمة

Full topographic survey deliverables for five sites, each split into a grid of A0 sheets with a key plan: parcels, roads, walls, utilities and dense spot levels in Civil 3D and AutoCAD. Before issue I checked the new surface against 1,911 reference levels from earlier surveys; the comparison exposed a consistent offset of about 0.43 m, flagged in the QC report.مخرجات رفع طبوغرافي كاملة لخمسة مواقع، كل موقع مقسّم إلى شبكة لوحات A0 مع لوحة مفتاحية: القطع والطرق والأسوار والمرافق ومناسيب كثيفة في Civil 3D وAutoCAD. قبل الإصدار قارنت السطح الجديد بـ1,911 منسوباً مرجعياً من رفوعات سابقة، وكشفت المقارنة فرقاً منتظماً بنحو 0.43 م وُثّق في تقرير الجودة.

Roleدوري
Project lead: processing, surface building, QC, sheet productionقائد المشروع: المعالجة، بناء الأسطح، الجودة، إخراج اللوحات
Outputالمخرجات
Civil 3D surfaces, A0 sheet sets, comparison reportsأسطح Civil 3D، مجموعات لوحات A0، تقارير المقارنة
Toolsالأدوات
Civil 3DAutoCADExcelGNSS
Plan · elevation · profile sheets · 27 sلوحات المسقط والارتفاعات والقطاع · 27 ثانية
C3DAlqotr · AJC · earlier roles

Surfaces, contours, quantities & topographic mappingالأسطح والكنتور والكميات والخرائط الطبوغرافية

Survey data turned into terrain surfaces and drawing sets in Civil 3D and ArcGIS. A typical road-corridor package has ten sheets: details, CAD, map, contours, colour contours, colour elevation, slope arrows, slope areas, triangulation and the Civil 3D model. I also prepare earthwork and quantity extracts, and topographic databases to the TDS standard. The sample sheets here come from one 10.8 km corridor survey of 4,499 points: a 1:1000 plan, a colour elevation map with its range table, and the longitudinal profile.تحويل بيانات الرفع إلى أسطح ولوحات في Civil 3D وArcGIS. حزمة ممر الطريق النموذجية عشر لوحات: التفاصيل، CAD، الخريطة، الكنتور، الكنتور الملوّن، الارتفاعات الملوّنة، أسهم الميول، مناطق الميول، الشبكة المثلثية، ونموذج Civil 3D. وأعد أيضاً مستخلصات الكميات وأعمال التربة، وقواعد البيانات الطبوغرافية وفق معيار TDS. اللوحات المعروضة هنا عينة من رفع ممر طوله 10.8 كم و4,499 نقطة: مسقط بمقياس 1:1000، وخريطة ارتفاعات ملوّنة مع جدول الفئات، والقطاع الطولي.

Roleدوري
Surface modelling, contouring, slope analysis, quantity extracts, sheet productionنمذجة الأسطح، الكنتور، تحليل الميول، الكميات، إخراج اللوحات
Outputالمخرجات
TIN surfaces, contour and slope maps, quantity tables, TDS topographic dataأسطح TIN، خرائط الكنتور والميول، جداول الكميات، بيانات طبوغرافية
Toolsالأدوات
Civil 3DAutoCADArcGISGlobal Mapper
Case-study film · 48 s · with soundفيلم المشروع · 48 ثانية · بالصوت
GISAJC · Alqotr

Roads, parcels, imagery & spatial analysisالطرق والقطع والمرئيات والتحليل المكاني

Roads, road buffers and land parcels digitized from imagery and open data, cleaned to a layer standard and exported to municipal geodatabases. Each delivery passes a QC routine for geometry, topology and attribute completeness. Satellite and aerial imagery is classified, clipped and analysed to support land-use and change studies. For a dry port project, the client's AutoCAD drawings were converted into an updated GIS geodatabase in ArcGIS Pro: CAD To Geodatabase, then layers split by CAD layer into roads, edges, centrelines and markings, with the CAD attributes kept.رسم الطرق ونطاقاتها وقطع الأراضي من الصور الجوية والبيانات المفتوحة، وتنظيفها وفق معيار طبقات موحّد، وتصديرها إلى قواعد البيانات البلدية. يمر كل تسليم بإجراءات فحص للأشكال والطوبولوجيا واكتمال البيانات الوصفية. وتُصنَّف المرئيات الفضائية والصور الجوية وتُقص وتُحلل لدعم دراسات استعمالات الأراضي ورصد التغير. وفي مشروع ميناء جاف، حُوّلت ملفات الأوتوكاد المسلّمة من العميل إلى قاعدة بيانات GIS محدّثة في ArcGIS Pro: تحويل الكاد إلى قاعدة بيانات، ثم فصل الطبقات حسب طبقات الكاد إلى طرق وحواف ومحاور وتخطيط، مع الاحتفاظ بخصائص الكاد.

Roleدوري
Digitizing, CAD-to-GIS conversion, layer standards, spatial analysis, QCالرسم، تحويل الكاد إلى GIS، معايير الطبقات، التحليل المكاني، ضبط الجودة
Outputالمخرجات
Road and parcel layers, GIS geodatabase from CAD, QC exportsطبقات الطرق والقطع، قاعدة بيانات GIS من الكاد، مخرجات الفحص
Toolsالأدوات
ArcGIS ProERDAS ImagineAutoCAD / Civil 3DOpenStreetMapModelBuilder
Workflow · 65 s · deed and plan → field survey → boundary reportمسار العمل · 65 ثانية · من الصك والمخطط إلى الرفع الميداني ثم تقرير الحدود
CADAJC · Alqotr · 2022 – 2026

Property surveys, survey decisions & boundary reportsالرفع العقاري والقرارات والتقارير المساحية

I prepared official survey reports and survey decisions for land plots and public facilities across Saudi Arabia, including a municipal surveying program in Riyadh and utility sites in the Eastern Province. Each sheet compares boundaries on the ground with the approved plan or title deed, and records lengths, areas and UTM coordinates tied to municipal benchmarks.أعددت تقارير وقرارات مساحية رسمية لقطع أراضٍ ومرافق عامة في عدة مناطق بالمملكة، منها برنامج رفع مساحي بلدي في الرياض ومواقع مرافق في المنطقة الشرقية. تقارن كل لوحة الحدود على الطبيعة بالمخطط المعتمد أو الصك، وتوثّق الأطوال والمساحات والإحداثيات (UTM) المربوطة بنقاط الأمانة المرجعية.

Roleدوري
Prepared the reports: processing field data, boundary comparison, drafting and sheet layoutإعداد التقارير: معالجة بيانات الرفع، مقارنة الحدود، الرسم وإخراج اللوحة
Outputالمخرجات
Survey reports, survey decisions, boundary and area tablesتقارير مساحية، قرارات مساحية، جداول الحدود والمساحات
Toolsالأدوات
AutoCADArcGISGNSSAerial imagery
Field work by survey teams on similar projectsأعمال ميدانية لفرق المساحة في مشاريع مماثلة
FIELDEgypt · Saudi Arabia · 2016 – present

Field surveying with conventional and modern instrumentsالرفع الميداني بالأجهزة التقليدية والحديثة

Field work runs through my whole career. In Egypt I spent five years with total stations, levels and GNSS: road surveys for the Asyut Western Road and the Abu Zenima–Gharandal road, construction surveying for the Commanders' Hospital, and survey consultancy for King Salman University networks, where I checked contractors' surveys and prepared quantity extracts for drainage, water, irrigation and firefighting lines. In Saudi Arabia the field work moved to modern instruments: GNSS control networks, detail surveys, ground-penetrating radar for buried utilities, and mobile and terrestrial scanning, with every observation processed into checked survey drawings and GIS layers.العمل الميداني حاضر في مسيرتي كلها. في مصر عملت خمس سنوات بالمحطات الشاملة والميزان وأجهزة GNSS: رفع طريق أسيوط الغربي وطريق أبو زنيمة–غرندل، والمساحة الإنشائية لمستشفى القادة، واستشارات المساحة لشبكات جامعة الملك سلمان، حيث راجعت رفوعات المقاولين وأعددت مستخلصات الكميات لشبكات الصرف والمياه والري والحريق. وفي السعودية انتقل العمل الميداني إلى الأجهزة الحديثة: شبكات تحكم GNSS، والرفع التفصيلي، والرادار الأرضي GPR لكشف المرافق المدفونة، والمسح المتنقل والأرضي بالليزر، مع معالجة كل الأرصاد إلى لوحات مساحية وطبقات GIS مدققة.

Photos show company survey teams on similar projects, shared to illustrate the methods.الصور لفرق المساحة بالشركة في مشاريع مماثلة، وتُعرض لتوضيح طرق العمل.

Toolsالأدوات
Total stationLevelGNSS / RTKGPRAutoCADCivil 3D
Teachingالتدريس

Teaching, training & course materialsالتدريس والتدريب وإعداد المواد التعليمية

I teach GIS and survey data processing, and write the full course material myself: lessons, exercises and capstone projects.أُدرّس نظم المعلومات الجغرافية ومعالجة البيانات المساحية، وأُعدّ المادة التعليمية كاملة بنفسي: الدروس والتمارين والمشاريع التطبيقية.

5 days · 106 pages · ArcGIS Pro

Advanced spatial analysis and change detection in GISالتحليلات المكانية المتقدمة ورصد التغيرات في نظم المعلومات الجغرافية

  1. Spatial analysis conceptsمدخل إلى التحليل المكاني ومفاهيمه
  2. Topographic and surface analysisالتحليل الطوبوغرافي وتحليل الأسطح
  3. Network analysisالتحليل الشبكي
  4. Spatial statisticsالتحليل الإحصائي المكاني
  5. Spatio-temporal change detectionرصد التغيرات الزمنية والمكانية
94 pages · Civil 3D

Civil 3D for survey data processing and surface modellingمعالجة البيانات المساحية ونمذجة الأسطح باستخدام Civil 3D

  1. Understanding survey data before processingفهم بيانات الرفع قبل المعالجة
  2. Detecting and fixing survey errorsاكتشاف أخطاء الرفع ومعالجتها
  3. Building accurate digital surfacesإنشاء الأسطح الرقمية بدقة
  4. Quantities and surface analysisحساب الكميات وتحليل الأسطح
  5. Producing engineering drawings, with a full capstone projectإخراج اللوحات الهندسية مع مشروع تطبيقي متكامل
Oct 2023 – Jan 2025 · Lecturer

GIS lecturer · Maadi International Academyمحاضر نظم المعلومات الجغرافية · أكاديمية المعادي الدولية

  1. GIS theory and spatial data fundamentalsأسس نظم المعلومات الجغرافية والبيانات المكانية
  2. Hands-on ArcGIS workflowsالتطبيق العملي على ArcGIS
  3. Google Earth Pro for mapping and data collectionGoogle Earth Pro للخرائط وجمع البيانات
  4. Mentoring students for GIS careersتوجيه الطلاب نحو سوق العمل في GIS
Experienceالمسيرة

Careerالمسيرة المهنية

Jan 2025 — Presentيناير 2025 — حتى الآن

Mobile Mapping System Expertخبير أنظمة المسح المتنقل

Alqotr Engineering Consulting Company · Saudi Arabiaشركة القطر للاستشارات الهندسية · السعودية
  • Integrated BIM, CAD, point cloud and GPR data into a coordinated 3D city model in ArcScene.دمج بيانات BIM وCAD وسحب النقاط وGPR في نموذج مدينة ثلاثي الأبعاد منسق على ArcScene.
  • Produced 3D visuals presented at the FIG Working Week in South Africa.إنتاج مرئيات ثلاثية الأبعاد عُرضت في أسبوع عمل FIG بجنوب أفريقيا.
Aug 2022 — Jan 2025أغسطس 2022 — يناير 2025

GIS Analystمحلل نظم معلومات جغرافية

AJC Information Technology Company · Saudi Arabiaشركة AJC لتقنية المعلومات · السعودية
  • Led GIS design and analysis of electrical networks for digital transformation projects.قيادة تصميم وتحليل شبكات الكهرباء على GIS لمشاريع التحول الرقمي.
  • Operated MMS and processed LiDAR into DTM/DEM, topographic maps and contours.تشغيل المسح المتنقل ومعالجة بيانات الليدار إلى نماذج سطح وخرائط طبوغرافية وكنتور.
  • Linked AutoCAD drawings to GIS databases, including cadastral boundary work.ربط لوحات AutoCAD بقواعد بيانات GIS، ومنها أعمال حدود الملكيات.
Oct 2023 — Jan 2025أكتوبر 2023 — يناير 2025

GIS Lecturerمحاضر نظم المعلومات الجغرافية

Maadi International Academy (MIA)أكاديمية المعادي الدولية (MIA)
  • Taught GIS theory and hands-on ArcGIS and Google Earth Pro, and mentored students for GIS careers.تدريس أسس GIS والتطبيق العملي على ArcGIS وGoogle Earth Pro، وتوجيه الطلاب نحو سوق العمل.
Jun 2021 — Apr 2022يونيو 2021 — أبريل 2022

GIS Specialist & GIS Analystأخصائي ومحلل نظم معلومات جغرافية

Edge Pro · Afaq Management Consulting · Freelanceإيدج برو · آفاق للاستشارات الإدارية · عمل حر
  • Remote sensing and GIS for agricultural resources with ERDAS Imagine and GeoMedia; GIS server management.استشعار عن بعد وGIS لإدارة الموارد الزراعية باستخدام ERDAS Imagine وGeoMedia، وإدارة خوادم GIS.
  • Led environmental consultancy mapping and optimal route selection.قيادة خرائط الاستشارات البيئية واختيار المسارات المثلى.
Sep 2019 — May 2021سبتمبر 2019 — مايو 2021

Survey Specialist & Quantity Surveyorأخصائي مساحة وحصر كميات

Al Noor Company · Egyptشركة النور · مصر
  • Directed surveying operations, the technical office, quantity surveying and cost estimates for construction projects.إدارة أعمال المساحة والمكتب الفني وحصر الكميات وتقدير التكاليف لمشاريع الإنشاء.
Jul 2016 — Aug 2019يوليو 2016 — أغسطس 2019

Survey Specialist & Survey Consultantأخصائي واستشاري مساحة

Seif Surveying Office · Capital AIC · Edmo · and others · Egyptمكتب سيف للمساحة · كابيتال · إيدمو · وغيرها · مصر
  • Road, infrastructure and construction surveying, including Asyut Western Road, Abu Zenima–Gharandal Road and King Salman University networks.رفع الطرق والبنية التحتية والإنشاءات، ومنها طريق أسيوط الغربي وطريق أبو زنيمة–غرندل وشبكات جامعة الملك سلمان.
Toolkitالأدوات

Tools & credentialsالأدوات والمؤهلات

Mobile mappingالمسح المتنقل

Trimble MXTrimble Business CenterTopoDOTOrbit 3DMicroStation

GIS

ArcGIS ProArcSceneArcGIS ServerGeoMediaGlobal MapperGoogle Earth ProPython

CAD & remote sensingالرسم والاستشعار عن بعد

AutoCADCivil 3DRevit modelsERDAS ImagineMetashape

Data & fieldالبيانات والميدان

PostgreSQLSQL ServerGNSS / GPSTotal stationLevelExcel · PowerPoint
  • Remote Pilot Certificate (Drone) · Open Categoryرخصة طيار عن بُعد (درون) · الفئة المفتوحةGeneral Authority of Civil Aviation (GACA), Saudi Arabia · valid to May 2027الهيئة العامة للطيران المدني · سارية حتى مايو 2027
    2026
  • Saudi Council of Engineersالهيئة السعودية للمهندسينMember · classified GIS Specialistعضو · أخصائي نظم معلومات جغرافية
    SCE
  • Project Management InstituteMember · PMP candidate · PMP Diploma (2025)عضو · مرشح PMP · دبلوم إدارة المشاريع (2025)
    PMI
  • Advanced LiDAR & 3D Point Cloud Applicationsتطبيقات متقدمة لليدار وسحب النقاط3D Tricks
    2025
  • Diploma in GISدبلوم نظم المعلومات الجغرافيةAin Shams Universityجامعة عين شمس
    2022
  • ArcGIS Pro: Utility Networks, Spatial Analysis, PythonArcGIS Pro: شبكات المرافق، التحليل المكاني، PythonPlus photogrammetry, water network modelling, Civil 3D quantitiesإضافة إلى التصوير الجوي ونمذجة شبكات المياه وكميات Civil 3D
    GIS
  • Training of Trainers (TOT) Diplomaدبلوم إعداد المدربين (TOT)Plus Effective Leaders Preparation Diplomaإضافة إلى دبلوم إعداد القادة
    TOT
  • B.A. Geographyبكالوريوس الجغرافياZagazig Universityجامعة الزقازيق
    2016

Have a survey, GIS or digital twin project?لديك مشروع مساحة أو GIS أو توأم رقمي؟

Available for consulting, freelance delivery and project leadership in Saudi Arabia and remotely.متاح للاستشارات والعمل الحر وقيادة المشاريع داخل السعودية وعن بُعد.

LinkedInlinkedin.com/in/sameh-ayman-gis
Emailالبريدsamehayman.gis@gmail.com
Saudi Arabia · WhatsAppالسعودية · واتساب+966 50 970 3982
Egypt · WhatsAppمصر · واتساب+20 109 225 3958
CVالسيرة الذاتيةDownload PDFتحميل PDF